facebook no script image

Rockford Fosgate  P2D2-10

Punch Series 10" 600W Peak Power Handling 2 Ohms Dual Voice Coil Car Subwoofer

Item #28469

Condition:   Brand New

Product Highlights

  • Series: Punch
  • Size: 10"
  • Power Handling: 600W Peak
  • Impedance: 2 Ohms
  • Dual Voice Coil

  Free 2-Years Warranty Included!
60 DAYS Returns Accepted.
FREE Lifetime Tech Support.
FREE Shipping.
60 DAYS Price change protection.

$179.99

Reg. Price $244.99  Save $65.00
Add Extended Warranty
  Free 2-Years Warranty Included!
60 DAYS Returns Accepted.
FREE Lifetime Tech Support.
FREE Shipping.
60 DAYS Price change protection.

No Credit needed for acima logoLearn More

Rockford Fosgate Authorized Dealer

Huge Saving on Other items:


Huge Saving on Other items:


Rockford Fosgate Banner

Rockford Fosgate P2D2-10 Punch Series 10" 300W RMS (600W Peak Power Handling) 2 Ohms Dual Voice Coil Car Subwoofer


We are a Rockford Fosgate authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!

What's Inside?
  • • (1) 10" Dual 4-ohm voice coil subwoofer
  • • Trim ring
  • • (8) 1-1/8" Allen head screws
  • • 4mm Allen head bit
  • Owner's Manual

 


Why Choose Rockford Fosgate P2D2-10 Component Car Subwoofer?


 

Rockford Fosgate P2D2-10 Component Car Subwoofer Front View
Signature Punch Bass Sound

Rockford Fosgate has always been known as "The PUNCH" and the P2 10" Punch car subwoofer certainly continues with the tradition. Kevlar fiber-reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 10 inch subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available.

Powerful Low End You Crave in Your Ride

Engineers at Rockford Fosgate designed the P2D2-10" subwoofer to dish out the kind of powerful low end you crave in your ride. Its responsive paper cone is reinforced with the same Kevlar® fibers used in bulletproof vests so you get the best of both worlds — warm bass that's exceptionally hard-hitting. Rockford Fosgate uses a new technique to attach the oversized rubber surround to the cone that increases available cone area up to 25%, so this sub can push more air for even bigger bass.

Rockford Fosgate P2D2-10 Component Car Subwoofer Bottom View
Rockford Fosgate P2D2-10 Component Car Subwoofer Side Profile View
High-Output Trail Bass Built to Last

Engineered with a bulletproof Kevlar-reinforced cone, stitched tinsel leads, and heavy-duty 10-AWG compression terminals, this 10-inch beast handles punishing vibration and heat without breaking a sweat. Optimized to drop easily into space-saving enclosures, it delivers the deep, clean, low-end impact you need to turn your rig into the ultimate mobile party.

 


Frequently Asked Questions (FAQ)


  • • Why isn't the subwoofer producing enough bass?
    Check the enclosure volume, amplifier gain, crossover settings, and speaker polarity. An incorrect enclosure or reversed polarity can noticeably reduce bass output and make the system sound weak.
  • • What enclosure should I use for the best performance?
    Use a properly sized sealed or ported enclosure that follows the manufacturer's recommended specifications. The correct internal volume helps produce deeper, cleaner, and more controlled bass.
  • • How should I wire the dual voice coils?
    The dual voice coils can be wired in different configurations to achieve the desired final impedance. Make sure the selected wiring configuration matches your amplifier's minimum supported load.
  • • Why does the amplifier go into protect mode when the bass hits?
    Check the final impedance, power and ground connections, and speaker wiring for shorts. An incorrect load, voltage drop, or overheating can trigger protection during heavy bass passages.
  • • Why does the bass sound distorted at high volume?
    Distortion can occur when the amplifier clips, the gain is too high, or the subwoofer is pushed beyond its recommended limits. Lower the gain and verify the system is properly tuned.
  • • Why is the enclosure making rattling or buzzing noises?
    Inspect the mounting screws, enclosure joints, speaker terminals, and nearby vehicle panels. Loose hardware or air leaks can vibrate with the bass and create unwanted noises.
  • • Does this subwoofer need a break-in period?
    A gradual break-in period allows the suspension to loosen naturally during normal use. Start at moderate volume levels and avoid prolonged maximum output during the first several hours.
  • • Can I use it with a factory head unit?
    Yes, but an external amplifier is typically needed to provide sufficient power. Depending on the vehicle, a line output converter or compatible signal interface may also be required.
  • • Why does the bass become weaker when I turn up the volume?
    Check for amplifier clipping, voltage drop, protection mode, or an incorrect impedance load. These problems can cause the amplifier to reduce output or shut down when bass demand increases.
  • • What amplifier should I pair with this subwoofer?
    Choose an amplifier that provides appropriate clean RMS power at the final wired impedance. Proper power matching helps maximize bass performance while reducing the risk of clipping or damage.

SPECIFICATIONS


  • Diameter : 10 Inch
  • Sensitivity : 84 dB
  • Impedance : 2 Ohm
  • Frequency Response : 30-250 Hz
  • Peak Power Handling : 600 Watts
  • Shallow Mount : No Inch
  • Number of Voice Coils : Dual
  • Suggested Sealed Box Volume : 1.02 Cubic ft.
  • Suggested Ported Box Volume : 1.79 Cubic ft.
  • RMS Power Handling : 300 Watts

FEATURES


Features:

  • Custom 10-AWG nickel plated push terminals
  • Diamond cut cast aluminum trim ring with optional grille
  • Dual linear spider with embedded 16 AWG tinsel leads
  • Extended pole piece and bumped vented backplate
  • High-temp voice coil with spun-laced Nomex® re-inforcement collar
  • Kevlar fiber reinforced paper cone
  • Protective PVC textured magnet cover
  • StampCast basket with integrated spider venting
  • CEA-2031 compliant
  • Flex fit basket
  • Stitched tinsel leads
  • Anodized aluminum voice coil former
  • Nominal Impedance: Dual 2-Ohm
  • Voice Coil Diameter: 2.25"
  • Speaker Connector: Dual 10 AWG compression
  • Fs (Hz): 29
  • Qts: 0.50
  • Vas (Liters): 35.4
  • SPL (dB @ 1w/1m): 83.9
  • Xmax (mm): 8.5
  • Woofer Displacement: 0.052 cu.ft.
  • Cutout Diameter: 9.125"
  • Mounting Depth: 5.92"

 

Specifications:

  • Size: 10 -inch
  • Impedance (Ohms): 1, 4
  • Cone Material: Kevlar reinforced paper
  • Surround Material: Santoprene
  • Ideal Sealed Box Volume (cubic feet): 0.59
  • Ideal Ported Box Volume (cubic feet): 1.4
  • Port diameter (inches): 4
  • Port length (inches): 14
  • Free-Air: No
  • Dual Voice Coil: Yes
  • Sensitivity: 84 dB at 1 watt
  • Frequency Response: 29 - 250 Hz
  • Max RMS Power Handling: 300
  • Peak Power Handling (Watts): 600
  • Top Mount Depth (inches): 5 15/16
  • Bottom Mount Depth (inches): N/A
  • Cutout Diameter or Length (inches): 9
  • Vas (liters): 35.4
  • Fs (Hz): 29
  • Qts: 0.5
  • Xmax (millimeters): 8.5
  • Parts Warranty: 1 Year
  • Labor Warranty: 1 Year
  • UPC: 780687332679
  • Weight: 30
  • Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.

Do you own this product?

Write a review!
  • i was one of the first to own the new p2s here in phoenix. i didnt get these from online car stereo, i got them from a local shop. for the price they arent bad. i wanted to go with a 100% rockford fosgate punch series audio system in my 2006 pt crusier. i got 2 of these 10"s in a slot proted box, 2011 p652s, 2011 p653, 2010 p500.2, soon to be a 2010 p400.4, all 4awg punch power and ground wire with the big 3 install. the subs are loud and fairly clean. they are a huge step up from the old p2s. you will be happy if you buy them. im thinking about building a sealed box for more sound quality. if you decide to buy these, and put them in a sealed box, please post a review and tell me how you like it. THANKS!!!!!!! ROCKFORD FOR LIFE!

    Jason
    4/24/2011

  • I just bought a Rockford Punch P300-1 amp, a 10" P2D2-10 for my Wrangler with a custom box with sub facing down. The sheet on the amp says its around 430Watts x 1 but I'm wanting to add another sub and at my local dealer one salesman said that my Punch P300-1 is plenty of power for both tens but another salesman wants to give me full credit for the P300-1 and get the Rockford Prime 750. I know Prime is Rockfords Low end but it runs at 85.1% effencinancy while the P300-1 is at 73.1% but the Prime runs hotter at 137grams Thermal mass per inch and the Punch is 275grams. The salesman I originally dealt with said keep the P300-1 and it's plenty of power but the other salesman said to get the Prime750 and it would be better for two subs. They both work at the same place so if anyone knows about this stuff please let me know my e-mail is mattamos311@gmail. Also I wanted JL but they sold me on Rockford, whats better JL or Rockford?

    Matt Amos
    7/4/2012

  • Small sub but a lot of thump.

    Sam
    10/14/2014
free installation

Must haves for Rockford Fosgate P2D2-10:

Other items that might interest you: